lead slag flotation process

Product Description

Introduction

Floatation Separator is usually a continuous process by a few tanks, dozens of tank flotation machine connection, including roughing, scavenging, concentration operations. The use of flotation machine should meet the following requirements about equipment and processes, varies parts are complete and intact. Machines function normally and achieve the required aeration rate. Motor drives impeller rotating through belt and pulley. On the one hand, the machine inhaled enough air mixed with slurry, on the other hand, stirring the mixture of pulp and pharmaceutical. At the same time, refinement of the bubble, the particles adhere to the bubbles on the role of reagents and float to the slurry surface. So it the formation of mineralized froth layer and scraped by the scraper.

Main Features

1. Air charging system is mainly composed by the inlet air pipe;
2. The flotation machine has large inhaling capacity and low energy consumption;
3. Complete flotation circuit with inhaling air and pulp, no auxiliaries are needed;
4. Reasonable circulation of pulp decreases coarse sand sedimentation.

Working principle

XCF mode and KYF mode are inflation flotation machine. Impellers’ little diameter and lower peripheral speed make power consumption reduce 30-50%. Air distributor is equipped in cell to get air evenly, lengthening impeller and rotor’s service life. KYF mode has no self-suction pulp function but lower power consumption,XCF mode has self-absorption pulp,places horizontally without foam pump,and equipped with stator to form negative pressure zone,but power consumption is little more than that of XCF type, so XCF and KYF combined together to work,the former as suction tank, the latter as direct-current cell, combined flotation machine place horizontally without foam pump.

Main Parts

Name: XCF impeller

Machine Parts

Name: KYF impeller

Main Features

Mechanical agitation(KYF),no air inhalation and no pulp sucked automatically. it is combined with XCF cells as the direct cells.

Pre-Sales Service

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.

Ball mill machine

91.8% Response Rate

Spiral chute concentrator

91.8% Response Rate

Shaking table

91.8% Response Rate

Mineral Processing Equipment is a kind of large porous ceramic disc which is fired by inorganic membrane making technology.lead slag flotation process has following characteristics:large filter area.high intensity and even aperture.Besides,the aperture size can be adjusted according to actual demands.Mineral Processing Equipment is alumina,it has good resistance to acid and alkali.After a period of application,the ceramic filter board can be cleaned by cycle reverse cleaning,ultrasonic and chemical cleaning agent and so on,to let the boards work with high efficiency.
JHBHHHHG
Mineral Processing Equipment is a kind of equipment which combines the characteristics of spiral concentrator, spiral chute, shaking table and centrifugal concentrator. lead slag flotation process is the best equipment for mining and mineral processing, especially for beach, riverside, sand beach and Creek channel. Mineral Processing Equipment has the advantages of reasonable structure, simple installation, less land occupation, simple operation, stable ore dressing, lead slag flotation process clear ore classification, large processing capacity, high efficiency, high concentration ratio of ore dressing, high recovery rate and reliable operation.
JKJBHGB