best price crusher for hard stone

Introduction:

This series of machines, applying to the mining and mineral processing plant, is effective in

improving production efficiency and economic profit. As we all know, the energy consumption

statistics for traditional ore crushing: ore extraction is 3%-5%, crushing job is around 5%-7%, 85%-90% is for grinding job. So reducing the grinding consumption will be the direct and effective way to improve profits. Wtih the very small outlet particle size, complete ore disintegrate, removing a lot of impurities, enriching a large number of mineral composition, our double-stage crusher reducing the amount of grinding materials, improve the grinding efficiency up to 50%, and greatly improve the economic benefits of mineral processing.

The characteristics of two-stage crusher:

1. The machine cavity has two crushing system. Secondary crushing and fine crushing is 2 in 1.

2. The outlet fineness is less than 3mm, which 0.5-0.075mm (35 mesh -200mesh )fineness is more than 50%, 0.6-2mm fineness is around 35%, and 2-3mm fineness is around 15%.

3. Due to the complete disintegrating, after the initial separation, the 3-5% raw ore will remove more than 70% gob or impurities, which improve the concentrate ore

up to 20%-40%.

4. Because of the grinding grade increases and reducing the inlet grinding material, our two-stage crusher improve the capacity of grinding job up to more than 50%.

5. This series of crusher is made of special wearable materials. The lifetime of hammerhead is

more than 4 times than common material hammerhead.

6. There is no screen grate with this crusher, and the crushed materials will be out directly

without paste or plug. Also there is no ineffective wear or reactive power consumption.

7. This series of crushers have double shafts and double flywheels, and they are running

smoothly, great inertia and saving electricity more than 20%.

8. The open/close housing cases of these crushers are hydraulic power unit, and it is easy and

convenient to fix and exchange the parts.

9. These series of crushers can crush can high water content materials. They can be used for

tile-brick industry which using the gangue or shale to make new type materials for wall.

10. The two-stage crusher is the preferred main equipment for the coal mine backfilling waste rock

crushing process.

11. The two-stage crusher can be widely used for electricity industry, cement industry, refractory industry,

coal mining industry and so on.

The Parameters of two-stage crusher:

Online contact way:

Skype: jeany225

Whatsapp: 008613783672015

Fine Crusher, gold hammer mill price is applicable for both dry and wet crushing.best price crusher for hard stone grinder hammer mill crusher machine is widely used for medium or fine crushing Fine Crusher for medium hard and brittle materials by departments of mine, cement,best price crusher for hard stone coal,building material, metallurgy, Fine Crusher chemical industry, road construction,gas chemical industry and best price crusher for hard stone thermal power generation, etc. Coal gangue,coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains,alum, brick and tile, etc.
HSFGYGDJ
When the Fine Crusher is working, materials are crushed primarily in the first crushing chamber by the high speed moving rotor against the hammer, and then enter the secondary chamber for fine crushing, at last, the final materials are discharged.best price crusher for hard stone adopts "stone-stone" principle with a huge arc-shaped crushing cavity, which is a screen cavity with grate seam
JHBJHVJK