PF series Stone Impact Crusher

Stone Impact Crusher PF-V series

1. Main use

This product can be divided into two series: II impact plate, III impact plate, with high crushing ratio which can process the materials with the length less than 350-1000mm, and apply to the crushing of medium hard materials when the compressive strength≤350Mpa. Discharging granularity is very small and good, and the material granules are in cube shaper. The elaborate rotor parts have such good characteristics as good dynamic & static balance, stable operation and low noise.

2. Advantages

a. Unique design, with good crushing effect

b. Excellent structure design of rotor parts

c. Adjustable impact rack, convenient and flexible

d. Using the most durable parts and materials

e. Good design of frame opening structure

f. High-quality welding technology

The processing capabilities listed in the form shall vary according to different working conditions.

3. Main technical data

Impact Rock Crusher is used for primary, secondary and fine crushing of all kinds of stones and rocks with compressive strength less than 350 MPa such as granite, marble, and limestone.PF series Stone Impact Crusher is widely used for sand and rock production in the industry of roads, railways, reservoir, electricity power, building materials and so on.
JHDGFHVB
When the PF series Stone Impact Crusher works, the motor drives the rotor to rotate with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. Impact Rock Crusher And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed. PF series Stone Impact Crusher The materials from large to small all to be crushed at the impact chamber repeatedly. The process won’t stop till the material are crushed to the required size and then discharged from outlet.
JKKJBLK