2018 new design 5x series sand making machine advanced mechanism sand production line

2018 new design 5x series sand making machine advanced mechanism sand production line!!!

5x series sand making machine:

Feed grain size:30-50mm
Capacity:70-640T/h
Final grain size:mechanism sand
Applied hardness:normal mineral

Brief introduction

The advantages of the first generation of impact sand making machine and the two generation VSI sand making machine are learned. For the first time, a new type of machine sand equipment with hydraulic device is adopted for the first time. The 5x sand making machine is mainly applied to the operation of advanced machine sand production line. It has good grain shape, large yield, high efficiency and more advanced.

Technicals

Performance

1. After the optimized design of the deep cavity type rotor, the material passing is increased by about 30%.
2. It can be used up and down after partial wear of the guard plate, improve the utilization of material, and increase the service life by more than 48%.
3, combined hammer head design, only need to replace the wear of the hammer part, can reduce the cost of the use of more than 30%. In addition, the auxiliary hammer head is added to effectively prevent the damage of the vertical plate after the main hammer is worn.
4, more core wear resistant materials are used in important industries in the United States with high wear resistance and high temperature resistance.
5, using the diamond impact block to avoid the damage of the vertical plate after the material impact wear.
6, the bearings of Japan, Sweden, the United States and other international brands.

Working theory

1)Center Feeding:

The materials fall into the hopper, the central feeding hole into the high-speed rotation of the rotor after being

fully accelerated and the emission mouth thrown first and rebound after the free falling part of the material

impact, and impact to the vortex shaped material around the eddy cavity lining (or counter block), the first is

rebound to the top the crushing chamber, after partial steering movement, forming a continuous material curtain

and emitted from the impeller material impact, even after discharged through the lower part.

2)Center and Sides Feeding:

The material falls into the feed hopper and falls down through a circular hole. The material is divided into two

strands. Appearance of the lining plate into the high-speed rotation of the impeller, another from the periphery of

the lining plate falls into the impeller material is quickly accelerated in the impeller of high-speed throws, first with

the bulk of another part of the material around the free fall impact plate broken, and then with the impact to the

vortex shaped material around the vortex cavity the liner (or counter block), was first to the top of the rebound in

the crushing cavity, after partial steering movement, forming a continuous material curtain and emitted from the

impeller material impact, even after discharged through the lower part.

The entire center feeding: Sand Making Machine Material falls the feed hopper, then enters the high-speed rotary sling wheel from center feeding hole, which is speeded immediately in the sling wheel. 2018 new design 5x series sand making machine advanced mechanism sand production line The speed can reach several dozens times of the gravity acceleration. Then Sand making machine is thrown from the sling wheel. First, Sand Making Machine is crushed with other rebounded material fell freely from the sling wheel.
JHGJHVJHD
Then both of them are impacted to the material lining (rock-rock) or strike back block (rock-iron), rebounded and stroke to the Good of eddy cavity of Sand making machine in the inclined-up direction. Then 2018 new design 5x series sand making machine advanced mechanism sand production line moves along deflection-down, and forms a continuous material curtain with the material from the impellers passage. Just like this, the material is stroke, rubbed, crushed twice or more, then is discharged from the down discharging hole. There is little loss for medium-sized and fine sand and stone powder. Sand Making Machine The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. 2018 new design 5x series sand making machine advanced mechanism sand production line has longer service life and little maintenance chance.
JHGVHGCD