Capacity 12-360 t/h making sand machine

Capacity 12-360 t/h making sand machine

I. Sand Making Machine Application:

Sand Making Machineis also called new sand making machine, it’s

widely used in the chemical industry, construction, coal mining, refractory

material and so on, Further crushing the medium hard materials, such as

gypsum, talcum, limestone, cement, clay, Calcite, granite, river gravel ,

basalt and so on.

II. Sand Making Machine Structure:

The equipment is mainly consist of turning parts, plate parts and housing

part.

•1). Lower house

•2). Square steel

•3). High chrome grate

•4). Hammer

•5). Hammer block

•6). Side plate

•7). Second break cavity

•8). Hammer bolt

•9). Upper plate

•10). The first break cavity

III. Sand Making Machine Features:

•1). Simple and reasonable structure, low cost.

•2). High broken ratio, save power.

•3). Fine crushing and coarse grinding. Light impeller wear and easy maintenance.

•4). Less infCapacity 12-360 t/h making sand machinece by material moisture content, water content can reach 8%.

•5). More suitable for hard and ultra-hard materials.

•6). Cubic product, high pilling up density and low pollution.

•7). Low noise (less than 75 decibels), less dust.

IV. Main technical parameters:

The entire center feeding: Sand Making Machine Material falls the feed hopper, then enters the high-speed rotary sling wheel from center feeding hole, which is speeded immediately in the sling wheel. Capacity 12-360 t/h making sand machine The speed can reach several dozens times of the gravity acceleration. Then Sand making machine is thrown from the sling wheel. First, Sand Making Machine is crushed with other rebounded material fell freely from the sling wheel.
JHGJHVJHD
Then both of them are impacted to the material lining (rock-rock) or strike back block (rock-iron), rebounded and stroke to the Good of eddy cavity of Sand making machine in the inclined-up direction. Then Capacity 12-360 t/h making sand machine moves along deflection-down, and forms a continuous material curtain with the material from the impellers passage. Just like this, the material is stroke, rubbed, crushed twice or more, then is discharged from the down discharging hole. There is little loss for medium-sized and fine sand and stone powder. Sand Making Machine The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as sand for construction and cobble and broken stones for construction. There are no other wear parts except the screen mesh. Capacity 12-360 t/h making sand machine has longer service life and little maintenance chance.
JHGVHGCD