5T/H Ultrafiltration mineral water treatment system/ plant/machine/equipment

5T/H Ultrafiltration mineral water treatment system/ plant/machine/equipment

Ultrafiltration (UF):

Our UF systems are usually operated in a pressure range of 10 to 50 psig and they remove particulate via size exclusion down to as low as 0.02 µm. Typical flux (rate of finished water permeate per unit membrane surface area) for UF is 10-100 gallons per square foot per day (gfd).

Our UF membrane systems use advanced hollow fiber or ceramic technologies operated in the outside-in or inside-out direction of flow. Given the small membrane pore sizes used with these technologies, fouling due to deposition of organic and inorganic compounds on the membrane may occur if the system is not properly designed and operated. Therefore, we use automated backwashing, air scour and chemical flushing processes to maintain the rate of membrane fouling within acceptable limits. Chemical cleaning is employed once a maximum transmembrane pressure has been reached. Typical cleaning agents utilized include acids, caustic, surfactants, enzymes and certain oxidants, depending upon membrane material and fouling type.

Common Applications

Municipal drinking water filtration

Industrial Wastewater Recovery

COD Reduction

RO & NF Pre-treatment

Typical Features

Welded and Powder Coated Steel Skid Frames

High Quality Membrane Elements

Module Housings with Sampling Ports

Stainless Steel Feed Pump

Stainless Steel Schedule and/or 80 PVC Pipe Work

Automated Control Valves

Integrated Process Controls

Automatic Backwash System

Pressure Gauges

Flow Transmitters

Pressure Transmitters

(CIP) Clean-In-Place System

Optional Features

PLC/HMI/VFD Controls

Remote Data Interface via User-Defined Network Protocol

Redundant pumps

Feed and Process Tanks

Stainless Steel Skid Frames

VFD's

Hypochlorite & Acid Dosing

Coagulant Feed System

Gravity Drain Tanks

1. To achieve the water treatment objectives, we draw on years of experience operating and upgrading all kinds of treatment plants and leverage the talents of the employees of Landau Company Process Solutions and Technologies.

2. To meet the diversified and varied needs of the market and customers, we are providing OEM services to realize the product uniqueness and distinctiveness in the market.

3. We have obtained so many certificates for our product to ensure our quality and safety, so our customers could use and buy it freely.

4. We have special contracts with Sea shipping forwarder and as per your order quantity which could save much less freight fee (about 10%~50%) for you with fast shipping time.

Xi’an Landau Mechanical & Electric Co.,Ltd., a professional manufacturer is in the field of water treatment equipment in China over 10 years, manufacturing of the water treatment equipment, including RO system, UF system, EDI Series, Water softening equipment, Ion exchange system, Wastewater Treatment, Seawater desalination, Pressure Media Filters and consumable & accessory etc.

Our company's concept: Quality for Survival; Credit for Development. With all sincerity, we can build mutually beneficial cooperation and create a bright future together. Thanks for your attention and we hope to hear from you.

Q: What is your main products line?

A: Concentration makes excellence; we manufacture the water treatment equipment, including RO system, UF system, EDI Series, Water softening equipment, Ion exchange system, Wastewater Treatment, Seawater desalination, Pressure Media Filters and consumable & accessory etc.

Q: We directly control our product quality

A: We have setup complete QS structure to secure the products quality in terms of raw materials selection, rational design and fine process.

Q: We also provide OEM/ODM service

A: To meet the diversified and varied needs of the market and customers, we are providing OEM services to realize the product uniqueness and distinctiveness in the market.

Q: How the payment procedure?

A: the payment is welcomed by 5T/H Ultrafiltration mineral water treatment system/ plant/machine/equipment Trade Assurance order e-checking payment, T/T, West Union for your favorable one.

Welcome to contact with us for more Information

Landau --- Water Treatment Solutions Expert

Dear Sir/Madam, thanks for your kindly attentions on top manufacturer of industrial waste water treatment equipment and welcome to you kindly enquiry, we definitely provides a high-performance custom treatment solution for any variety of wastewater types and industries, to meet your business target and reduce your operating cost.

Mineral Processing Equipment is a kind of large porous ceramic disc which is fired by inorganic membrane making technology.5T/H Ultrafiltration mineral water treatment system/ plant/machine/equipment has following characteristics:large filter area.high intensity and even aperture.Besides,the aperture size can be adjusted according to actual demands.Mineral Processing Equipment is alumina,it has good resistance to acid and alkali.After a period of application,the ceramic filter board can be cleaned by cycle reverse cleaning,ultrasonic and chemical cleaning agent and so on,to let the boards work with high efficiency.
JHBHHHHG
Mineral Processing Equipment is a kind of equipment which combines the characteristics of spiral concentrator, spiral chute, shaking table and centrifugal concentrator. 5T/H Ultrafiltration mineral water treatment system/ plant/machine/equipment is the best equipment for mining and mineral processing, especially for beach, riverside, sand beach and Creek channel. Mineral Processing Equipment has the advantages of reasonable structure, simple installation, less land occupation, simple operation, stable ore dressing, 5T/H Ultrafiltration mineral water treatment system/ plant/machine/equipment clear ore classification, large processing capacity, high efficiency, high concentration ratio of ore dressing, high recovery rate and reliable operation.
JKJBHGB