China supply Saw tooth wave / diaphragm mineral processing jig

China supply Saw tooth wave / diaphragm mineral processing jig

The description of mineral processing jig

This machine Can achieve a good result in processing such as placer gold, tungsten, iron, tin, hematite, cope,

tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc.saw-tooth Jig

operating recovery rate is higher than the sine wave by the sn: 3.01%, w: 5.5%, pb: 1.63%, zn: 2.04%; water

consumption reduced by 30% -40%, covers reduction by 1/3, and the stroke is adjustable. The performance of Saw-tooth Wave

Jig has reached the domestic advanced level, and is one of the ideal devices in energy-saving gravity separation.

The feature of mineral processing jig

High capacity

High concentration ratio and high recovery

Fabricated with highest quality material

Easy to install, operate and maintain

The pulsation curve is saw-tooth wave shape facilitate heavy mineral to settling

Saving water 30-40% than ordinary jig

The pulsation speed very easy adjusted by regulator

Suitable for roughing and desliming

The working principle of mineral processing jig

Jig machines need water to work, and it loosens materials in vertical alternative water-flows, and it forms different layers of materials

of different densities and discharges both layers from up and down

discharging ports separately. The basic composition of jigger is jigging chambers, also called jigging boxes,

and there are screens in each chamber.Water and raw ore will be fed from one end of the jigger screen,

the ore granules will move in the vertical alternative water-flows. Layers will be formed because of density difference of materials.

The minerals with small density will be in the up layer and will flow together with the up pulp flow while material with bigger

density will be in the down layer and will discharged from the down discharging port as jigging concentrate.

The appplication of mineral processing jig

jig machine is one of the gravity separation equipment. It is of large capacity, wide range of

sorting grain size, simple operation and maintenance, widely used as coarse or fine sorting machine in the

beneficiation of gold, tin-tungsten, titanium, hematite, too, coal and other minerals.

The techincal parameters of mineral processing jig

Mineral Processing Equipment is a kind of large porous ceramic disc which is fired by inorganic membrane making technology.China supply Saw tooth wave / diaphragm mineral processing jig has following characteristics:large filter area.high intensity and even aperture.Besides,the aperture size can be adjusted according to actual demands.Mineral Processing Equipment is alumina,it has good resistance to acid and alkali.After a period of application,the ceramic filter board can be cleaned by cycle reverse cleaning,ultrasonic and chemical cleaning agent and so on,to let the boards work with high efficiency.
JHBHHHHG
Mineral Processing Equipment is a kind of equipment which combines the characteristics of spiral concentrator, spiral chute, shaking table and centrifugal concentrator. China supply Saw tooth wave / diaphragm mineral processing jig is the best equipment for mining and mineral processing, especially for beach, riverside, sand beach and Creek channel. Mineral Processing Equipment has the advantages of reasonable structure, simple installation, less land occupation, simple operation, stable ore dressing, China supply Saw tooth wave / diaphragm mineral processing jig clear ore classification, large processing capacity, high efficiency, high concentration ratio of ore dressing, high recovery rate and reliable operation.
JKJBHGB